Quick Searches

USB relay
  LPT relays
  RS485 relays


New Products

Latest News

Dear Customers,
Please check the discount in certain categories, such as "USB Host Relay", "Relay boards", "LPT Relays", "RS485 Relays", "RS232 Relays", "UART Relays " ,"RF433 MHz Relays ", "Programmers"
Thank you!

Control4 compatible LAN DS18B20 WEB Temperature Monitor

LAN DS18B20 WEB Temperature Monitor with ONE Sensor (Basic version)
  • Code: SS_LAN_DS18B20_MONITOR_Control4
  • Manufacturer: KMtronic
  • In stock: 46

Price: €39.00

 LAN DS18B20 High-Precision 1-Wire Digital Temperature Monitor

LAN DS18B20 Temperature Monitor


• Fully assembled and tested.
• Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
• Support up to 4 temperature sensors

Complete including:
- 1x LAN 1-Wire Adapter
- 1x DS18B20 Temperature Sensor (~20 cm cable)


IP address:
Subnet Mask:
Default Gateway:
Username: admin
Password: admin

Reset to Default Settings:
Hold Reset button for 10 seconds

KMTronic LTD

• Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
• Support up to 4 DS18B20 temperature sensors


Requires external 12 volt DC / 600mA power supply


LAN DS18B20 High-Precision 1-Wire Digital Temperature Monitor


More information and software examples:

LAN DS18B20 High-Precision 1-Wire Digital Temperature Monitor




 Control 4

Control4 KMtronic Web Temperature Monitor Driver by Soft.Kiwi



Device setting (from the KMTronic Howto)

The default IP address of the device is If your LAN IP mask is different, you need one time access to network 192.168.1.x to change default setting of KMTronic.

Open a browser and type

The default user is admin with password admin.

In “Configuration” menu you can change default IP Address, Gateway and HTTP Port.

For the integration with Control4, the device must have a fixed IP address. Please, set it on the device or in your DHCP server setting.

In “Authorization Configuration” you can change username name and password for device authentication. They will be required during the Driver configuration, so write them down.

Verify on web page of Temperature Monitor if your sensors work.

Driver installation

Install the driver in your Control4 project using the composer (as any other driver) and set the folllowing properties:

· Debug: in normal operating conditions is better to set it to “Off”
· KMTronic IP: device IP you set in the previous step.
· KMTronic Port: device HTTP Port if you changed it.
· KMTronic User & KMTronic Password: the one you use to access to the device from a browser (web interface).
· Polling minutess: select the frequency you want to update Control4 about the change of sensors status.
· Calibrate sensor: you can calibrate your sensor here.
· License code: copy & paste here the license code obtained during the license buying process.


For each temperature sensor, you will find a Temp_Sensor connection that allows to connect it to the Yatun Software Thermostat (Free) -

You simply have to create new connections with Temperature Input.

Have fun with our Made in Italy, Homemade Organic Drivers!


Additonal information

  Payment accepted:
Credit Card payments, PayPal

Bank Wire Transfer

We ship WORLDWIDE through TNT.

  Import duties, taxes and charges are not included in the item price or shipping charges. These charges
are the buyer's responsibility. Please check with your country's customs office to determine what these additional
costs before you purchase.

Shopping Cart

Cart is empty.



Local Time


Work time
Monday - Friday
9.00am - 5.00pm





Technical support


Recently Viewed