Features:
• Fully assembled and tested.
• Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
• Support up to 4 temperature sensors

Complete including:
- 1 x LAN 1-Wire Adapter
- 4 x DS18B20 Temperature Sensors 1 meter cable

Default:
IP address: 192.168.1.199
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Username: admin
Password: admin

Reset to Default Settings:
Hold Reset button for 10 seconds

Manufacturer:
KMTronic LTD

Features:
• Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
• Support up to 4 DS18B20 temperature sensors

Specifications:
DS18B20
http://www.maximintegrated.com/sensors-and-sensor-interface/DS18B20.html

Supply:
Requires external 12 volt DC / 600mA power supply

More information and software examples:
info.kmtronic.com/temperature.html
 

Control4 KMtronic Web Temperature Monitor Driver by Soft.Kiwi

Device setting (from the KMTronic Howto)

The default IP address of the device is 192.168.1.199. If your LAN IP mask is different, you need one time access to network 192.168.1.x to change default setting of KMTronic.

Open a browser and type 192.168.1.199.

The default user is admin with password admin.

In “Configuration” menu you can change default IP Address, Gateway and HTTP Port.

For the integration with Control4, the device must have a fixed IP address. Please, set it on the device or in your DHCP server setting.

In “Authorization Configuration” you can change username name and password for device authentication. They will be required during the Driver configuration, so write them down.

Verify on web page of Temperature Monitor if your sensors work.

Driver installation

Install the driver in your Control4 project using the composer (as any other driver) and set the folllowing properties:

· Debug: in normal operating conditions is better to set it to “Off”
· KMTronic IP: device IP you set in the previous step.
· KMTronic Port: device HTTP Port if you changed it.
· KMTronic User & KMTronic Password: the one you use to access to the device from a browser (web interface).
· Polling minutess: select the frequency you want to update Control4 about the change of sensors status.
· Calibrate sensor: you can calibrate your sensor here.
· License code: copy & paste here the license code obtained during the license buying process.

Connection

For each temperature sensor, you will find a Temp_Sensor connection that allows to connect it to the Yatun Software Thermostat (Free) - www.yatundev.eu/drivers/software-thermostat-free

You simply have to create new connections with Temperature Input.

Have fun with our Made in Italy, Homemade Organic Drivers!

c4.soft.kiwi